Flow Measuring Instruments - Myko Electronics Pvt Ltd

Purge Rotameter (MK-PR Series)

adminuser — Sat, 02 Mar 2024 11:14:48 +0000

Design & Calibration Confirms to ISA-RP16.5 & ISA-RP16.5

The post Purge Rotameter (MK-PR Series) first appeared on Myko Electronics Pvt Ltd.

Acrylic Body Rotameter (MKA Series)

adminuser — Sat, 02 Mar 2024 11:09:31 +0000

Water Flow Switch

adminuser — Sat, 02 Mar 2024 11:00:19 +0000

The paddle type SPDT WFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction are
required used in liquid flow lines carrying water or any fluid n either harmful to brass and prosphoras bronze nor classified as a hazard us fluids.
They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate . The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquid s below 0°C. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water.

All series WFS flow switches are designed for use only as operating controls. Where an operating control failure would result in personal injury and/or
loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.

The post Water Flow Switch first appeared on Myko Electronics Pvt Ltd.

Pipe Line Strainers

adminuser — Sat, 02 Mar 2024 10:49:36 +0000

Intelligent Flow Computer (Flow rate indicator cum totalizar )

adminuser — Sat, 02 Mar 2024 10:36:30 +0000

MYKO ELECTRONICS PVT. LTD. Design and developed all in one flow Computer for all flow meter available in market, its use for all flow measuring application like measuring of : liquid volume, liquid mass, gas volume, gas mass, saturated vapor, superheated vapor and vapor auto, Flow compensation with pressure, temperature and standard density Self test facility and self diagnosis facility 3 level password protection

The post Intelligent Flow Computer (Flow rate indicator cum totalizar ) first appeared on Myko Electronics Pvt Ltd.

GAS Turbine Flow Meter GT Series

adminuser — Sat, 02 Mar 2024 10:22:22 +0000

High quality alloy turbine with higher flow stability and corrosion resistance
Imported high-quality special bearings with long service life.
The metering room is isolated from the ventilation room, thus ensuring the safety of the instrument.
It can detect the temperature, pressure and flow rate of the measured gas, automatically track and compensate the flow rate, and display the gas volume accumulation under the standard state (Pb=101.325 KPa, Tb=293.15 K); The temperature and pressure values can be queried in realtime.
Wide flow range (Qmax /Qmin ≥20:1), good repeatability, high accuracy (up to grade 1.0), small pressure loss, low initial flow, up to 0.6 m3/h
Multi-point nonlinear correction of intelligent instrument coefficient
Built-in pressure and temperature sensor, with high safety performance, compact structure and beautiful appearance
The instrument has explosion-proof and protection functions. The explosion-proof marks are ExdIIBT6 and ExiaIICT6, and the protection grade is IP65The system operates with low power consumption, and a 3.6 V10AH lithium battery can be continuously used for more than one year.
Instrument coefficient and cumulative flow value will not be lost after power failure for ten years

The post GAS Turbine Flow Meter GT Series first appeared on Myko Electronics Pvt Ltd.

Industrial Swirl Flow Meter (Air/Gas Flow Meter)

adminuser — Sat, 02 Mar 2024 10:14:30 +0000

No moving parts, wear resistance, structure is simple and fastness
The allowed working temperature is wide from -20℃ to +80℃
Wide range, High accuracy
The body Material could be aluminum or Stainless steel as per different pressure requirement
Pulse signal output, two-wire system 4-20mA current output, RS-485 output

The post Industrial Swirl Flow Meter (Air/Gas Flow Meter) first appeared on Myko Electronics Pvt Ltd.

Industrial Thermal Mass Flow Meter (Air/Gas Flow Meter)

adminuser — Sat, 02 Mar 2024 10:12:32 +0000

Measuring Medium - Various gases (Except the acetylene)
Pipe Size - DN10～DN4000mm
Velocity - 0.1～100 Nm/s
Accuracy - ±1～2.5%
Working - Temperature
Sensor: - 40°C ～+220°C
Transmitter: -20°C ～+45°C
Working - Pressure
Insertion Sensor: medium pressure= 1.6MPa
Flanged Sensor: medium pressure= 1.6MPa+
Power Supply 24VDC or 220VAC, Power consumption =18W
Response Time - 1s
Output - 4-20mA (optoelectronic isolation, maximum load 500Ù), Pulse, RS485 (optoelectronic isolation) and HART
Alarm Output -1-2 line Relay, Normally Open state, 10A/220V/AC or 5A/30V/DC
Sensor Type - Standard Insertion, Hot-tapped Insertion and Flanged
Construction - Compact and Remote
Pipe Material - Carbon steel, stainless steel, plastic, etc

The post Industrial Thermal Mass Flow Meter (Air/Gas Flow Meter) first appeared on Myko Electronics Pvt Ltd.

Vortex Flow Meter

adminuser — Wed, 27 Dec 2023 17:46:52 +0000

MYKO Vortex Flow Meter bases on vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry, etc.

One triangular prism vortex generator in the flow meter, regular vortex will be generated at both the sides of triangular prism, which is called Karman swirl. Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the width of the surface of triangular prism incident flow, Then we get the computation formula.

Application :

Pure liquids and hydrocarbon with low viscosity (< 10 cP)
Water
Chemicals that suitable with S.S. 316 Material
Saturated steam
Superheated steam
Industrial gases
Compressor air measurement

The post Vortex Flow Meter first appeared on Myko Electronics Pvt Ltd.

Spherical Flow Meter

adminuser — Wed, 27 Dec 2023 17:33:16 +0000

Myko developed and produced Spherical rotor Positive displacement flow sensor specially for replace oval gear flow sensor at some application where liquid is not pure and require easy and low weight flow meter.

Spherical flow meters are positive displacement meters with a very favorable low pressure drop behavior. therefore perfectly suited for the flow measurement of very high viscosity fluids.

Due to wide measuring ranges, high accuracy and resolution helical flow meters are an excellent choice for laminating systems, painting systems, adhesive dispense systems, as well as batching systems for various fluids.

Features :

High accuracy
Pressure: up to 400 bar , special range up to 1500 bar
Independent of viscosity, perfect for 1 to 106 mm²/s
Low pressure drop compared with other positive displacement meters
High resolution
Pulsation-free measurement, non-sensitive to pulsating flows
Resistant to corrosion by advanced materials and bearings

Applications :

Polyurethane and polymer
Light and heavy fuel oil
Petrochemical products
Thixotropical fluids
Fat and oils with varying viscosities
Hydraulics Test rigs with varying viscosities and fluids
Water / glycol mixtures
Crude oil, furnace oil, and all viscous liquid even viscosity change with Temperature
Very good for WATER atm, water dispensing, tea/coffee/wine/juce and other food liquid measurement and dispensing

The post Spherical Flow Meter first appeared on Myko Electronics Pvt Ltd.