The wetted material is made of 17-4 PH stainless steel and the transducer’s durability is excellent with no o-rings, welds or organics exposed to the pressure media. The M5200 is weatherproof and exceeds the latest heavy industrial CE requirements including surge protection. The circuit is protected from reverse wiring at input and short circuit at output.

This product is geared to the OEM customer for low to mid volumes. MEAS stands ready to provide a custom design of the M5200 where the volume and application warrants. Additional configurations not listed are either available or possible. Please inquire for further information.

The post Pressure Transmitter (MEAS) first appeared on Myko Electronics Pvt Ltd.

ME 150 is very easy to use and you will never get lost in a multilevel menu system in fact you may never need to open the operation manual.

The post Digital Pressure Gauge first appeared on Myko Electronics Pvt Ltd.

The post Pressure Transmitter(MK-PX5) With Indicator first appeared on Myko Electronics Pvt Ltd.

Make : MYKO

Model : MK-PX5

Range : As Per Required

Output : 4-20 mA

Supply : 24 V DC

Process connection : 1⁄4”BSP male

Accuracy: +/- 0. 5% F.S

The post Pressure Transmitter (MK-PX5) first appeared on Myko Electronics Pvt Ltd.

The post Digital Pressure Transmitter (MK-PX5-D) first appeared on Myko Electronics Pvt Ltd.

The post Digital Pressure Guage (HP Series) first appeared on Myko Electronics Pvt Ltd.

The post ABB I/P Converter first appeared on Myko Electronics Pvt Ltd.

MYKO 500MK Series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of CMRI and ATEX* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier.

Principle of Operation
MYKO 500 MK Series transducer is a force balance device in which, when electrical current is passed through the coil of transducer magnetic field is created which acts on the magnet assembly, casuing the anvi & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.

The flapper/anvil move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases (or decreases for reverse acting) causes proportional output pressure increases.

Zero and Span are calibrated by turning easily accessible adjusting screws on the front face of the unit. The zero adhusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in series with the coil provides temperature compensation.

Integrated Characteristics

• Compact Design.
• Low Air Consumption.
• Integral Volume Booster-flow capacity up to 20 SCFM is boosted by the built in Volume booster.
• Field Reversible – Output provides inversely proportional to input signal.
• Flexible Adjustments of Zero & Span.
• Standard Process Inputs.
• Split Ranging
• NEMA 4X (Ip65) Enclosure – Optional

Applications
500MK Series transducers converts electrical signal to a pneumatic output which can be used to operate the fallowings :

• Valve, Valve-Actuators,
• Damper and Louver Actuators
• Valve Positioners
• Air-Cylinders
• Relays
• Clutches
• Web Tensioners and Brakes

Used in :

• Petrochemical Processing Systems
• Energy Management
• HVAC Systems
• Textile Processing Systems
• Pharmaceutical Processing System
• Clutches
• Pulp and Paper Handling Controls

The post Electro Pneumatic Converter first appeared on Myko Electronics Pvt Ltd.

• Digital Pressure Gauge
• Model : LC Series
• Make : MYKO
• Range : As Per Required
• Process connection: 1⁄4” BSP (M)
• Accuracy:± 0.5% FS

The post Digital Pressure Gauge (LC Series) first appeared on Myko Electronics Pvt Ltd.